Premium ABS filament – 2.85mm – Flaming Red™
1KG Reel – 1000g length in metres = 152.2
Form Futura Flaming Red™ 2.85mm ABS filament prints to a beautiful solid and non-transparent red colour. Your creation will have a too-hot-to-handle appearance…
It doesn’t matter which desktop 3D printer you have, as 3D Printing will always go smoothly with Formfutura filament. Our Premium 2.85mm ABS filament prints perfectly with all common desktop 3D printers. Amongst others:
- 3D Touch
- Rapidbot, Orca, Mendel
- AND MANY MORE….!
ABS (Acrylonitrile Butadiene Styrene in full), is a thermoplastic which, as its name implies, is produced by the polymerization of acrylonitrile, butadiene, and styrene. ABS produced from fossil fuels, meaning that it is not biodegradable and has a greater environmental impact than PLA for instance. Because of its toughness and strength ABS is a very popular and common used thermoplastic in industry.
|Filament Net Weight:||± 1 Kg|
|Spool Size (D x h):||195 mm x 85 mm|
|Spool Hub Diameter:||38 mm|
|Carton Box Size (L x W x H):||205 mm x 205 mm x 90 mm|
|Packaged weight||1.45 Kg|
Technical Data sheets available for download
General Tips and Tricks when printing with ABS filaments
The printing temperature guideline for printing with Form Futura Premium ABS filament is 235°C to 256°C. It’s advisable to use a heated print bed when printing with ABS, as it has a tendency to warp. Print bed temperature should be in the range of 80-110 degrees C (176 f to 230 f) Please note ABS will tend to bend under too much heat. It’s a good idea to turn down the temperature upon the print bed after printing a few layers.